In climates with high humidity, mold often develops in the home, especially in various types of clothing and other household items. Bathrooms and kitchens are relatively more humid places, and walls, especially corners, are more frequent places for mold to appear. Everywhere in the home may become a concentrated stronghold of mold, once the mold is extra disturbing. If not handled properly, it will cause economic losses, and even threaten the health of the family. Therefore, the home of the mold work should not be careless.
What kind of measures can be taken to really effectively play the effect of mold prevention?
Some people think that in the furniture surface painting glaze, paste tiles and so on can avoid the floor wall mold, in fact, is not, because the mold is in a specific temperature and humidity environment growth. Mold is a kind of fungi, parasitic or putrefactive way to survive, has a very strong ability to reproduce, even just a crack, as long as the conditions are suitable for growth.
Some people think that tile walls and glass doors don't get mold, at least not easily. We should have encountered moldy porcelain bowls, plates or glasses, moldy spots on tile floors or walls, and moldy spots on camera lenses. These porcelain and glass are materials that are generally considered not to be susceptible to mold, but mold and mildew growth can still occur in humid conditions, not to mention moisture-prone items such as food, fabrics, and wooden furniture and supplies.
Many people are only concerned about the temperature, but little attention to humidity, but in fact, humidity and temperature have a direct impact on the environment and human body. The human body feels comfortable with the best relative humidity between 50-65% RH, according to seasonal changes and temperature changes will vary, but the best living environment should be maintained at 40% -65% RH, while the prevention of disease, healing is 40% ~ 55% RH, the home of the items preserved, moldy moisture, such as no special humidity requirements, should be maintained at 40-55% RH. home environment in the South will generally be in the 70% RH or more, evening or rainy days, humidity is more than 90% RH. But in addition to extremely high humidity, the human body does not have any more obvious reaction to humidity, until the trigger health problems. So the home of the moisture control work should attract attention.
General moisture can use desiccant, moisture bags, such as dehumidification bags, lime, activated carbon, etc., relatively humid home environment is best to use dehumidifier dehumidification moisture. Dehumidifier using the principle of refrigeration dehumidification, refrigerant as refrigerant, direct evaporative cooler as cooling equipment, the air cooled to the dew point temperature below, precipitation greater than the saturated humidity content of water vapor, reduce the absolute humidity content of the air, and then use part or all of the condensing heat to heat up the cooled air, thereby lowering the relative humidity of the air to achieve the purpose of dehumidification. The use of dehumidifiers moisture control, you can accurately control the range of humidity, effectively preventing the propagation of indoor mold. With humidity under control, there is basically no risk of mold.
