The most common type of industrial dehumidifier is the refrigerated dehumidifier, which uses compressor refrigeration to condense the moisture in the air into water droplets and collect them, and then discharge the dry air. This cycle achieves the purpose of reducing indoor humidity. It has a wide range of applications in the pharmaceutical, hospital, electronics, computer, food and other industries.
In the actual application, dehumidifier has been praised by many customers. Factories and warehouses are no longer humid, the shelf life of the goods in the warehouse is greatly extended, but also to make the batch of finished products to improve the pass rate stability. Therefore, in recent years, industrial dehumidifiers have been welcomed by more and more people.
So, industrial dehumidifier in the process of using what need to pay attention to?
Industrial dehumidifier in the transportation, placement process, there will inevitably be vibration, side tilt and other actions, resulting in the compressor refrigerant displacement. If this time immediately start to use, the compressor will not be able to work properly, even if the machine can run, the noise will be very large, dehumidification efficiency will be relatively low.
Therefore, we need to leave the dehumidifier for more than 6 hours, so that the refrigerant in the compressor back in place and then go to use.
In terms of placement, we recommend placing the dehumidifier in a place with good air circulation and a flat floor, and placing it next to the wall not right next to the wall.
This is in order to let the humid air as soon as possible into the dehumidifier, but also allows the dry air quickly circulated to all corners of the plant to achieve a better dehumidification effect.
In addition, the industrial dehumidifier compressor power is relatively large, if placed close to the wall, after a long period of operation, the temperature will continue to rise, easy to lead to failure.
It is normal for industrial dehumidifiers to frost or freeze in low temperatures, which affects the inlet and outlet circulation and leads to a decrease in dehumidification capacity.
PARKOO's industrial dehumidifiers are equipped with the function of automatic defrosting, which starts the defrosting operation automatically when frost is formed, without manual attention.
Dehumidifier should be regularly on the air duct (air inlet and outlet) or filter cleaning, factories and warehouses more dust, long time use of dehumidifier, the air inlet is easy to clog, causing air inlet is not smooth, the wind can not go into the dehumidifier, will directly affect the effect of dehumidification, so we need to clean up the dehumidifier air duct filter on a regular basis, the frequency can be based on the site and the condition of the filter to decide.
When cleaning the filter, make sure that the power supply of the machine has been unplugged. Remove the filter, remove the dust with water and place it in a cool place to blow dry, then install it back to the original place. Do not use corrosive chemicals for cleaning or direct sunlight to prevent deformation or damage to the filter.
Filter aging or damage, to replace the new filter and then use the dehumidifier, try not to use the dehumidifier without a filter, so as to avoid dust and debris into the interior of the dehumidifier, affecting the life of the machine.
If the exterior of the dehumidifier also needs to be cleaned, you can use a soft cloth with a soft detergent to wipe, do not rinse with water.
JSMGDYWF extraction code: 6ad2
