Quality products often require a favorable production environment. In today's high-tech development, electronic devices are particularly important. Electronic production operations, strict requirements for the interior of the plant workshop, especially to control the temperature and humidity of the environment, cleanliness, because electronic devices, printed circuit boards, components and data are highly sensitive to electrostatic discharge.
An electrostatic discharge is a transfer of charge caused by objects with different electrostatic potentials coming into close proximity or direct contact with each other. Electrostatic discharges occur when different charged objects are in close proximity to each other, or when the dielectric between them is damaged, sometimes producing visible sparks. However, most electrostatic discharge events do not occur in a way that is readily noticeable. These unseen forms of electrostatic discharge can lead directly to equipment failure or may affect the long-term reliability and performance of electronic equipment.
Dry weather is prone to static electricity, the drier the air the more static voltage is generated, and the greater the harm caused. The voltage generated by electrostatic discharge will give these electronic products or components failure or safety hazards, or even make it completely damaged, can not be used normally. Maintain a suitable humidity environment for the production and storage of electronic products or components in the electronic factory is a pivotal role; if the control is not appropriate, the humidity in the electronic factory workshop does not meet the standards or too low a situation is prone to static electricity and dust interference.
However, in general, the electronic factory workshop environment humidity can not be higher than 60% RH, the main reason is because the humidity is too high, it will lead to the production of some moisture-sensitive components, such as IC, BGA and other integrated circuits affected by moisture, which in turn affects the MSD moisture-sensitive devices workshop life, resulting in subsequent production, MSD device function damage or failure.
PARKOOTECH ultrasonic humidifier humidification of the workshop, the humidity value is set at the most suitable between 50% ± 5% RH, to improve the production and staff health of indoor air quality, improve productivity, reduce electrostatic discharge on the production equipment and product damage, to ensure product quality.
