Rosewood furniture dryer, rosewood furniture drying dehumidifier integrated machine News Today, with the pace of building a moderately prosperous society in an all-round way, people's living standards are increasing, people's demand for rosewood furniture is increasing, and the rosewood furniture market is hot for collection, purchase and manufacturing; Rosewood furniture prevailed in the Ming and Qing Dynasties. Rosewood furniture is not only comfortable and beautiful to use, but also a high-end furniture and collection with great investment prospects; In recent years, many rosewood furniture enterprises have emerged due to the increasing attention of rosewood furniture. Some of these enterprises are relatively large, while some are family workshops; Today, we are going to talk about the drying process of the production process of mahogany furniture
In the production process of mahogany furniture, drying is a technical job. To ensure that mahogany furniture is not deformed or cracked, it must be dried scientifically and reasonably. In fact, there was drying in ancient times, but due to lack of technology, it was more natural air drying, as short as a few months, and as long as a year or two; That is, put the wood in the sun for sunshine and ventilation, so that the moisture content of the wood and the moisture content in the air can reach a balance; Hardwood with good properties, such as red sandalwood and yellow pear, has less shrinkage and swelling, and the furniture made by air drying has less deformation
Later, it appeared to use the rosewood oven for incoming drying, with low energy consumption, large pollution and high risk coefficient; After that, steam boilers, biomass particles, heating tubes, electric heating and other methods have been developed, but the drying results have always been unsatisfactory. After constant updating, we finally have an energy-saving and environment-friendly drying equipment--_ G rosewood furniture dryer and Parkoo series heating, drying and dehumidifying integrated dryer not only overcome the shortcomings of traditional methods, but also have a leap in innovation and improvement in drying and dehumidifying technology. After being put into use in the market in recent years, the feedback and effect of users' real use have been summarized, and continuous improvement has been made. Now it is a very mature drying equipment with high performance and temperature, safety and reliability, long service life, and low maintenance costs
For example, there are some wood processing enterprises in Fujian Province, and some mahogany furniture manufactured by them are often cracked when transported to the north. This is because the air humidity in the north is very low, especially in winter; Moreover, as precious hardwood resources are increasingly scarce, they are replaced by some grass, pear, and sour twig wood, which have large coefficient of shrinkage and expansion, and must be fully dried. Then, corresponding_ G mahogany furniture dryer and Parkoo series heating, drying and dehumidifying integrated machine are the best things to do
The main reason for cracking and deformation of mahogany furniture is that the moisture content of mahogany is unbalanced with that of the external environment. Therefore, wood drying should be appropriate, not the drier the better. Different regions and different uses have different requirements for wood moisture content. The equilibrium moisture content of wood varies according to the region, which is about 12% in the north, 18% in the south and 15% in the Yangtze River basin. For example, the average annual equilibrium water content in Guangzhou is 15.1%, while that in Beijing is 11.4%. The wood dried to 11% is suitable for Beijing, which will absorb moisture and expand and produce deformation when used in Guangzhou
Generally, the working environment temperature of conventional ordinary dehumidifiers is 5-38 ℃. If the temperature exceeds 38 ℃, the dehumidifiers will be automatically protected and shut down. However, in the material drying room and drying room, the indoor temperature generally exceeds 40 ℃, so the general refrigerated dehumidifier cannot work in this environment. At present, the material drying method of general enterprises is to forcibly discharge the hot and humid air in the drying room through the fan. In this way, the heat in the room is also discharged out of the room. For the demand of energy-saving dehumidification and drying in drying rooms and drying rooms, electrical appliances are specially developed_ G rosewood furniture dryer and Parkoo series heating, drying and dehumidifying integrated machine (applicable to dehumidification in the environment where the indoor temperature is higher than 38 ℃ but lower than 55 ℃)
1. Stress relief: through the "flexible" drying process, the residual stress in the wood drying and processing process can be effectively eliminated, and the drying defects can be reduced; At the same time, it meets the water content requirements of the product terminal area
2. Effective dehumidification: compared with conventional dehumidifiers, dehumidification can be increased by 20% - 30% in the same period of time on a year-on-year basis, and moisture regain of materials can be effectively prevented
3. Powerful functions: a single machine can realize heating and dehumidification functions, and the system can freely switch the operation modes such as heating and dehumidification according to the environment; The temperature and humidity are flexibly controlled to rise and fall, which is not affected by the environment and climate, and the performance is stable
4. Environmental protection and energy conservation: the new "flexible" drying and dehumidification technology can automatically complete the wood drying and dehumidification operation with only a small amount of electric energy, which is more energy efficient than the traditional drying method, without any pollutant emissions, completely replacing various combustion boilers and stoves, and fundamentally solving the problem of industrial pollution
5. Multiple applications: wood is subject to secondary drying, and the moisture content decreases from 20% to less than 12%. According to the characteristics of wood species drying process, it takes 2-6 days. If the initial moisture content of wood is less than 20%, the amount of wood processed and the process cycle can be adjusted accordingly
Welcome to inquire about the rosewood furniture dryer and rosewood furniture dryer dehumidifier! There are many kinds of drying and dehumidifying integrated machines. The prices and application ranges of different brands of drying and dehumidifying integrated machines will also vary slightly. We will provide you with high-quality products and comprehensive after-sales services
_ G rosewood furniture dryer and Parkoo series heating, heating, drying and dehumidifying integrated machine Technical parameters:
Model selection of integrated dryer and dehumidifier: select the appropriate model according to the overall humidity load of the actual drying room, specifically, calculate the cooling capacity, dehumidification capacity per unit time and other key data according to its area, floor height, evaporation capacity of drying water, initial humidity value, target humidity value, indoor sealing effect, moisture dissipation source, fresh air supply and other comprehensive factors to correctly select the required model. If you want to know more about the mahogany furniture dryer, the details of the mahogany furniture dryer dehumidifier can be found in: Hangzhou Parkoo Electrical Equipment Co., Ltd.
For example, due to the high humidity in the drying process of a drying room, the method of ventilation and moisture removal is adopted, and the drying time takes 24 hours; And_ G rosewood furniture dryer and Parkoo series heating, drying and dehumidifying integrated machine can quickly reduce the humidity in the drying room without exhausting heat; Now, it only takes 16 or 12 hours to achieve the original 24-hour drying effect, greatly reducing the operating cost of the drying room. It has been widely used in drying rooms of factories and enterprises all over the country, and its effect has been recognized by all users
To sum up, because of the increasing shortage of energy and the increasingly serious air pollution, the living environment is in jeopardy, which seriously affects the lives and work of users. Therefore, which industry and which product can make a breakthrough in environmental protection and energy conservation will surely win the hearts of users and be accepted by the market_ G rosewood furniture dryer and Parkoo series heating, drying and dehumidifying integrated dryer are just the drying equipment with high efficiency, energy saving, environmental protection and safety that the country, market and consumers are looking forward to, which can ensure that the dried rosewood furniture will not have cracks, deformation and other quality problems
If you want to make your mahogany furniture "go through a hundred years without decay", drying is a crucial link; Adopt scientific drying process and suitable drying equipment to make the moisture content of rosewood furniture reach the standard value. The north is not afraid of harvest, the south is not afraid of inflation, the weather is dry and wet. No matter whether it is sunny, cloudy or rainy, it will not crack or deform. This is also the secret of the long life of rosewood furniture! All the news reports about the rosewood furniture dryer and the rosewood furniture dryer dehumidifier are provided by the electric appliance for your reference and study
