How to humidify the weaving workshop? Today, in the cold and dry winter, the humidity of the air drops sharply, which will affect the strength, tension and tenacity of the fabric, resulting in static electricity, broken ends, dust, flying flowers, fuzzing and other problems. This will not only affect the output and quality, but also affect the working environment, resulting in reduced work efficiency and direct economic losses to the workshop
_ The 1-10 micron aerosol particles produced by the humidifier in the weaving workshop and the ZS series intelligent spray humidifier are not only uniform in particle sense, but also of high quality, and will not wet the fabrics, equipment and workers in the workshop. The most important point is that, under the action of the humidity automatic control system, it can cope with the changing relative humidity at any time, so as to achieve the humidity control at any time, so that the workshop environment is always kept in a constant humidity environment
Why should the weaving workshop be humidified? On the one hand, the climate and weather are constantly changing, and the air humidity is changing all the time, so the relative humidity of the weaving workshop is also changing forever; On the other hand, the influence of moisture absorption and warp sizing during weaving will indirectly cause the change of air humidity, thus leading to the instability of humidity. In fact, the main reason for controlling the relative humidity in the weaving workshop is that the humidity change is affected by climate factors and different fabrics
For example, in summer, the relative humidity of the weaving workshop should be controlled between 65% and 75% RH, and in winter, the relative humidity of the weaving workshop should preferably be kept between 70% and 75% RH; For polyester cotton blended fabrics, the relative humidity requirement is smaller than that of other fabrics, which can be controlled between 65% and 75% RH. The change of humidity in the weaving workshop will directly affect the output and quality of the fabric and whether the loom jet can work normally; In order to improve the output and quality, industrial humidifiers are generally installed in their workshops for scientific and reasonable humidification and humidity control
During the production process of weaving, due to the sizing and moisture absorption characteristics, the performance of the fiber itself has changed, and the temperature and humidity of the workshop have also changed. Therefore, it is necessary to maintain a suitable temperature and humidity environment in the weaving workshop by adjusting the air. To create better production conditions for production process and operators, and install industrial dry fog humidifier to promote production, quality and labor efficiency
_ Weaving workshop humidifier and ZS series intelligent spray humidifier are named for their extremely fine atomized particles, which can float in the air and evaporate quickly. Like dry fog, there will be no wetland and water dripping. Its main components are ultrasonic atomizer, waterproof power supply, waterproof fan, humidity control system, etc. The installation is fast and convenient. Through the intelligent humidity control system, the space humidity can be intelligently controlled within the set value! Welcome to inquire how to humidify the weaving workshop? Details of the humidifier in the weaving workshop
_ Control mode of humidifier in weaving workshop and ZS series intelligent spray humidifier, technical parameters:
Product model ------------ Humidification capacity ---- Power (220V) ------ Host size ------------ Fog outlet
ZS-10/ZS-10Z--------3KG/H----200(W)---530 × two hundred and fifty × 400(mm)--◎1 × 110mm
ZS-20/ZS-20Z--------6KG/H----400(W)---530 × two hundred and fifty × 400(mm)--◎1 × 110mm
ZS-30/ZS-30Z--------9KG/H----600(W)---630 × three hundred and twenty × 480(mm)--◎1 × 110mm
_/_-------- 12KG/H---700(W)---630 × three hundred and twenty × 480(mm)--◎1 × 110mm
ZS-60/ZS-60Z--------18KG/H---1050(W)--630 × three hundred and twenty × 480(mm)--◎2 × 110mm
ZS-80/ZS-80Z--------24KG/H---1200(W)--630 × three hundred and twenty × 480(mm)--◎2 × 110mm
ZS-100/ZS-100Z------30KG/H---1400(W)--630 × three hundred and twenty × 480(mm)--◎3 × 110mm
ZS-F3600/ZS-F3600Z--36KG/H---1550(W)--710 × four hundred × 360(mm)--◎3 × 110mm
ZS-F4200/ZS-F4200Z--42KG/H---1750(W)--710 × four hundred × 360(mm)--◎4 × 110mm
ZS-F4800/ZS-F4800Z--48KG/H---2100(W)--710 × four hundred × 360(mm)--◎4 × 110mm
◎ Model selection reference: there are many factors to be considered in the selection of humidifiers, such as the volume of indoor space, ambient temperature, equipment heat, ventilation, and air conditioning exhaust, which will affect the humidity of the indoor environment and the humidification effect. In general, a certain margin should be left when calculating the humidification amount, that is, the corresponding humidification amount should be increased, Moreover, the required humidification amount and corresponding humidifier model in the space shall be comprehensively calculated from low humidity humidification to ideal humidity range. See more weaving workshops How to humidify? The details of the humidifier in the weaving workshop are as follows: Hangzhou Parkoo Electrical Equipment Co., Ltd.
_ Weaving workshop humidifier and ZS series intelligent spray humidifier products adopt the principle of ultrasonic high-frequency oscillation atomization to achieve the purpose of uniform humidification; With air humidification, purification, anti-static and dust prevention, cooling, dust reduction and other purposes; For humidifiers of other humidification methods, it has the obvious advantages of [fine atomized particles], [low energy consumption], [high atomization energy efficiency], and [fast humidification speed]: it can not only uniformly humidify a larger space, but also locally compensate for humidity in a special space, with high flexibility
[Product weight] It can prevent moisture loss during cloth processing and storage, which will reduce the weight loss from the common 4% to 0.5%
[Yarn quality] Accurate humidification can maintain the strength and elasticity of yarn, so as to produce better products; And the reduction of off-line also reduces waste
[Electrostatic control] The static electricity generated by wool and dust will lead to the reduction of production and quality, the stagnation of the machine, the discomfort of employees, and even the occurrence of accidents. Increasing humidity can naturally eliminate static electricity and alleviate the above problems
[Weaving efficiency] Reasonable humidification can reduce the breakage of the spinning thread during the weaving process, reduce the failure rate of the machine, and reduce the breakpoints and nodes in the finished product
[Staff health] The humidifier can provide 5-10 ° C cooling for the cloth production workshop, and inhibit dust, fugitive dust and wool. This will provide a healthier and more efficient environment for employees
To sum up, the fluctuation of temperature and humidity plays a very important role in the normal production of the weaving workshop and the quality of finished products. If the relative humidity is too high, it is easy to produce narrow, long cloth, machine rust, fiber and part color, leading to increased friction coefficient, which is not conducive to the production of the weaving workshop; On the contrary, it is easy to produce cloth of wide width and short size. At the same time, the shrinkage of weft increases, static electricity grows, and dust floats. Therefore, it is very important to control the temperature and humidity of the weaving workshop scientifically and reasonably
Therefore, in order to further improve the weft humidification needs of the weaving workshop and the local high humidity requirements of the weaving area, more and more domestic weaving mills have purchased_ Weaving workshop humidifier and ZS series intelligent spray humidifier can conduct scientific and effective spray humidification between the isolated weft humidification room and the smooth selvedge variety area by installing PVC humidification pipes, greatly improving the environmental humidity of weft humidification room and the smooth selvedge area for large package varieties, and improving the weaving efficiency. How to humidify the weaving workshop? All news reports on humidifiers in the weaving workshop are provided by Mashima Electric, for your reference only
