industrial dehumidifier is more and more widely used in the production of enterprises, warehousing. Although more or less understand the principle of machine dehumidification operation, but sometimes just can't figure out its temperament, the feeling that the strike on strike, sometimes just blowing wind is not water, so that people wonder whether there is no realization of dehumidification in the end?
dehumidifier why not water? PARKOOio give you a generalization:
(1) environmental humidity is not high
This is an important reason why dehumidifiers do not produce water. It is not difficult for us to feel that in the spring and summer time, the air humidity is unpredictable, sometimes low and sometimes high. If continuous sunny days, the environment of the air humidity is generally about 60%, lower than the humidity value set by the machine, the dehumidifier will not work, it will not be out of water.
(2) humidity value set too high
The air humidity in the environment is indeed high, but the machine still does not run dehumidification, it is necessary to check the machine set the humidity value. If the machine humidity value is set to 80%, even if the environment of the air humidity of 70%, the machine will not run out of water, because of dehumidification requirements, then you need to reset the humidity value.
(3) Compressor high temperature protection
This condition generally occurs under high temperature conditions. General dehumidifier can only work in the environment below 38 ºC. If the machine and equipment overloaded, or the ambient temperature is higher than 38 ºC, resulting in the machine itself high temperature protection and stop working.
In industrial production, there are often many dehumidification work needs to be carried out at high temperatures, such as tea drying, pepper drying and so on. In response to this problem, PARKOO high-temperature dryer can work in an environment of 55 ºC or less, and there is a super-high-temperature dryer can support the work in an environment of 65 ºC or less.
(4) Compressor failure
Compressor body has a small gap, resulting in refrigerant leakage, can not condense water vapor into water in time, so the dehumidifier will not come out of the water. This situation should contact the after-sales personnel in a timely manner, back to the factory for repair.
parkoo dehumidifier with Panasonic compressor, has a strong power, high energy efficiency, quality is more guaranteed.
(5) Control panel malfunction
Control panel failure leads to the dehumidifier can not be regulated, the machine can not work properly, this time you can contact the after-sales personnel, the manufacturer to send a new control panel for replacement, or directly back to the factory for replacement.
A dehumidifier that does not produce water does not necessarily mean that the machine is broken. Even if the machine is malfunctioning but you can't do anything about it, you should contact the manufacturer right away for a technician to help analyze and quickly fix the problem.
PARKOO, focusing on the research and development and production of dehumidifiers, a strong technical team to give high quality product support, professional after-sales team to give quality service support.
