How to add moisture automatically in weaving workshop? ZS-120Z Weaving Workshop humidifier Technology Dynamic Changes in the ambient humidity of the weaving workshop will directly affect the output and quality of the fabric and whether the loom air jet can work normally. In order to improve the output and quality, industrial humidifiers are generally installed in the workshop to increase humidity and keep it constant
In fact, the main reason for controlling the relative humidity in the weaving workshop is that the humidity change is affected by climate factors and different fabrics
For example, in summer, the relative humidity of the weaving workshop should be better controlled between 65% and 75% RH, and in winter, the relative humidity of the weaving workshop should be better kept between 70% and 75% RH; For polyester cotton blended fabrics, the relative humidity requirement is smaller than that of other fabrics, and can be controlled between 65% and 75% RH, which can be achieved through industrial humidifier humidification
Why should the weaving workshop be humidified? On the one hand, the climate and weather are constantly changing, and the air humidity is changing all the time, so the relative humidity of the weaving workshop is also changing forever; On the other hand, the influence of moisture absorption and warp sizing during weaving will indirectly cause the change of air humidity, thus leading to the instability of humidity
It is now a cold and dry winter. The decrease of air humidity will affect the strength, tension and toughness of the fabric, resulting in problems such as static electricity, broken ends, dust, flying flowers and fuzzing. This will not only affect the output and quality, but also affect the working environment, thus reducing the working efficiency and directly causing economic losses to the workshop
ZS-120Z fabric workshop humidifier and ZS series intelligent ultrasonic industrial humidifier are special textile workshop humidifiers. It adopts the principle of ultrasonic high-frequency oscillation atomization. The produced micron sized aerosol particles not only have uniform particle feel, but also have many advantages such as large spray volume, wide control area, small atomized particles, fast evaporation, energy saving, long service time, wide application range, and will not wet the fabrics, equipment, and workers in the workshop
The ZS-120Z weaving workshop humidifier and ZS series intelligent ultrasonic industrial humidifier can adjust the amount of spray and humidity range at any time according to the change of weather and season, and can set the humidity range to be humidified in advance, so that the industrial humidifier can automatically humidified spray when it is lower than this parameter, automatically stop humidification when it is higher than this parameter, and automatically humidified spray when it is lower than this parameter, High degree of intelligence, saving manpower and material resources
The most important point is that ZS-120Z fabric workshop humidifier and ZS series intelligent ultrasonic industrial humidifier can cope with the changing relative humidity at any time under the effect of the temperature and humidity automatic control system, so as to achieve the humidity control at any time, so that the workshop environment is always kept in a constant humidity environment. In addition to its application in weaving workshops, it can also be used in electronics, printing, paper making, spraying, injection molding and other workshops for humidification, cooling, dust removal and static electricity removal
How do you automatically humidify the weaving workshop? ZS-120Z fabric workshop humidifier products are of interest, and electrical appliances can provide you with one-to-one customized air humidification, prevention and elimination of static electricity, and dedusting and cooling solutions for free
